Bottle-making systems
A broad preform portfolio for water, beverage, detergent and wide-mouth packaging. Neck finish, weight, colour and blowing behaviour are aligned with the finished container and line.
The 28 mm PCO1810 neck finish is used for carbonated beverages and other compatible bottles. Confirm pressure performance, cap fit and line settings for the final package. Multiple preform configurations are available in this neck family.
View product details
The neck specifications and dimensions of this series of preforms have been specifically designed to to be compatible with different types of dispensing pumps and closures of the cosmetics and hygienic bottles. Considering the relatively small neck diameter, the bottle volumes of this preform series are usually in the range of 200 to 1000 ml.
View product details
This type of opening has a similar design to the 28 mm opening of the PCO1810 standard in terms of some dimensions, with the difference that the support ring has been removed in the 28 mm opening of detergent to allow the installation of various types of caps such as trigger, pump, etc. for detergent bottles.
View product details
The 28mm Alaska neck has been designed with the purpose of reducing the overall weight of the preform and the corresponding cap for packaging non-carbonated liquids. This neck standard is similar to the PCO1810 in some key dimensions and is therefore compatible with the blow molding machines and the filling lines of PCO1810 preforms. The reduced weight of the Alaska neck preform in comparison to the PCO1810, along with the easier opening and closing of the cap (due to three separate threads of 180 degrees), have made this neck standard an ideal choice for edible oil and mineral water bottles.
View product details
The 29/25 opening, known in Iran as the Short Neck preform, is a newer and lighter design than the relatively older and heavier 30/25 opening, which is mainly used in the packaging of mineral and drinking water. Given the low weight of this type of preform neck and bottle cap, this opening is also a good option for packaging other non-carbonated products.
View product details
This neck standard is used in the packaging of non-carbonated products. While this opening is known as a special and relatively older standard for mineral water bottles, it can also be used in the packaging of other non-carbonated products such as milk, fruit juice, etc. and is of good strength and quality.
View product details
Due to the design that complies with the general and well-known SP400 standard and the presence of only one continuous thread in the design of this opening, the main application of this neck is mainly in the packaging of products that use special lids. (Such as flip-top lids that have the ability to close quickly and easily) The main use of 37-mouth preforms is in the packaging of food products such as sauces, honey, sesame creams and the like.
View product details
The 38mm 3-thread standard neck, designed by Bericap, is a lighter version of this opening compared to older versions of this type of neck. Due to its very suitable weight and dimensions, as well as the ease of opening and closing the cap, the 38mm 3-thread neck is a very suitable option for packaging still beverages including dairy products, fruit juices, yogurt, etc
View product details
The 45 mm neck family is intended for larger bottles, commonly around 2 to 5 liters, where filling and pouring need a wider opening. Confirm sealing, cap opening force, neck weight and handle compatibility as a complete packaging system.
View product details
The 89 mm wide-mouth neck is used for jars and larger containers. Confirm the matching cap, sealing method and dimensions against the final container and filling line.
View product detailsExport enquiry
Tell us about the product, destination and expected volume. The relevant regional team will review your request.
PET Preforms
